• Complete robot controller board and motor driver
• Only 0.9" x 0.9" (23mm x 23mm)
• Well under 0.1oz (2 grams)
• 6-12V operation
• Drives two DC motors (up to 500mA each)
• >500mA regulated 5V power for sensors and peripherals
• Pre-installed boot-loader for easy serial-port programming (Assembled version only. Requires separate inexpensive RS232 level converter)
• Atmel Mega8 AVR Microcontroller
• 16MIPS (8-bit instructions)
• 8K Flash; 1K SRAM; 512bytes EEPROM
• SPI, TWI, UART
• Eight 10bit Analog-to-digital convertors
• Analog comparator
• 16bit timer/counter w/ two PWM channels
• Two 8bit timer/counters
• Hardware multiplier

Documentation

• Instructions
  
• MEGAbitty Assembly Instructions
  
• MEGAbitty Programming and Usage Instructions
  
• Application Notes
  
  None available at this time.
• FAQs
  
  None available at this time.

Availability

• Assembled & Tested
  
Not offered at this time.
• Kit
  (Warning! Requires assembly of extremely small components! Good soldering skills and equipment are high recommended!):
• Solarbotics